You need to move a fluid which has a temperature of 60°C and a pressure of 10.57Atm, inlet of valve, and a temperature of 44°C and a pressure of 9.67Atm outlet of valve.
The composition of the feed is:
| C1 | 0.004 | mols |
| C2 | 2.261 | mols |
| C3 | 48.91 | mols |
| i-C4 | 20.220 | mols |
| n-C4 | 28.36 | mols |
| i-C5 | 0.027 | mols |
| n-C5 | 0.008 | mols |
If it should move 137.89 kmol/hr through of a butterfly valve, calculate CV. The environment temperature is 25°C.
Make click on FILE, on OPEN,and look for V1.da3 file, then OK. check it up all datum are right. Then click in CALCULE
It should not take more 1 second:
The calculated CV will be: 72.79, for a fluid in two phases.